Re: Trying to make a list of the rx 480's hash rate power and settings etc.
@
ubeyou wait til I post up photos I have an idea for you
okay re set wattman to stock on the two cards.
how many cards just 2 correct.
card 1 all auto until you reach the fan
on the fan
do 2000 4400 for fan speed
do 80c 60c for temps
do -28% for power
hit apply
card 2 all auto until you reach the fan
do 2000 4400 for fan speed
do 80c 60c for temps
do -28% for power
hit apply
you should get about 24mh + 24mh
now my pc is 100% for eth mining
I think you are trying to do other shit while mining?
Is this correct?
photos of a simple wattman tweak
re set all gpus in wattman to stock
boot
then leave gpu freq
on dynamic
voltage on auto
so gpu is stock
now stock for memory
Lastly the only tweaks are coming right here:
ubeyou wait til I post up photos I have an idea for you
I tried your setting, and it doesn't work as intended.
I'm solo mining SIA, the hash rates will reduced by at least 20% with the -28 power setting.
Maybe it works on ETH only.
I'm solo mining SIA, the hash rates will reduced by at least 20% with the -28 power setting.
Maybe it works on ETH only.
wattman keeps messing up and changing my 2nd cards settings to N/A and causing it to run at 96c with only 1400 rpm fan.. :/
okay re set wattman to stock on the two cards.
how many cards just 2 correct.
card 1 all auto until you reach the fan
on the fan
do 2000 4400 for fan speed
do 80c 60c for temps
do -28% for power
hit apply
card 2 all auto until you reach the fan
do 2000 4400 for fan speed
do 80c 60c for temps
do -28% for power
hit apply
you should get about 24mh + 24mh
now my pc is 100% for eth mining
I think you are trying to do other shit while mining?
Is this correct?
photos of a simple wattman tweak
re set all gpus in wattman to stock
boot
then leave gpu freq
on dynamic
voltage on auto
so gpu is stock
now stock for memory
Lastly the only tweaks are coming right here: