Welp, so long as we're all showing off, these are two of my dedicated miners:
http://i.imgur.com/jza5z.jpg
The top one is 2x 6990, and the bottom is 2x 5970. You can see three and four on the right and left of the benches, respectively.
I've got to shuffle some hardware around before I install the board in the top bench. I found the benches on Amazon, but the "Stackable" part was what sold me
Linky.
I've since moved everything to the garage. Installing some air ducts today to pipe the heat out of the gable fan that vents the garage. I'll post more photos then!
Also, let me say: God damn, we're all a MASSIVE bunch of nerds
More photos for the cable management nerds.
http://i.imgur.com/jza5z.jpg
The top one is 2x 6990, and the bottom is 2x 5970. You can see three and four on the right and left of the benches, respectively.
I've got to shuffle some hardware around before I install the board in the top bench. I found the benches on Amazon, but the "Stackable" part was what sold me
Linky.I've since moved everything to the garage. Installing some air ducts today to pipe the heat out of the gable fan that vents the garage. I'll post more photos then!
Also, let me say: God damn, we're all a MASSIVE bunch of nerds
More photos for the cable management nerds.
Where did he get the 4 bars to connect all the work bench cases?
Heh, funny story
It's sold as "Stackable," so I figured the stacking hardware would be in the box... but it's not. MyOpenPC sells an "Upgrade Kit," also on Amazon, that's specifically for this bench, and it has the stacking hardware in it. Like $15 I believe.