Hi, is anyone else having an issue with the new versions (6.0 and 6.1) not detecting all cards for temp monitoring?  

One of my rigs has 2 x 480x cards (plugged straight into 16x slots on the mainboard).

Rig is mining fine on both cards, but the temp is monitored for only one card.  Both cards are detected fine in windows (10), and also in wattman (I can control them in wattman fine), and behave otherwise as you would expect, but one is refusing to show its temp in the miner.

Nothing odd in the logfile, apart from the lack of temp from GPU1 :

21:11:33:748   11e8   GPU #0: Ellesmere, 8192 MB available, 36 compute units
21:11:33:763   11e8   GPU #1: Ellesmere, 8192 MB available, 36 compute units
21:11:33:779   11e8   ETH - Total Speed: 50.334 Mh/s, Total Shares: 4, Rejected: 0, Time: 00:01
21:11:33:779   11e8   ETH: GPU0 25.477 Mh/s, GPU1 24.857 Mh/s
21:11:33:779   11e8   Incorrect ETH shares: none
21:11:33:779   11e8   Pool switches: ETH - 0, SC - 0
21:11:33:779   11e8   Current ETH share target: 0x0000000556f9b3f0 (diff: 804MH), epoch #69
21:11:33:794   11e8   GPU0 t=62C fan=57%

Any ideas? (incidentally powerlimit is set low for the moment, so hashrate is a little down on normal)

I have another rig mining happily with 5 x 480's, all their temps detect fine with 6.0 and 6.1.

I have tried using -gser 2 without success.

Thanks in advance.