ok finally got the rom to work, had to do a full re-install of the drivers , copy the modded driver and then boot with option 7
not sure how to get option 7 to auto load on boot.
One issue I'm seeing
dual mining seems quite neutered compared to stock ? at 30 dcri I am seeing 24.5 eth and 360ish sc when before I was getting 23.5 eth and 420 sc
now if I mine eth only I was seeing high hash rates around 31mhs
Also the cards all now detect and 4GB I know others mentioned that as well, it does seem that the core clocks are maxing around 980 which might be the reason for the low SIA or dual mining ?
Try this one Marvell,
29Mh otb, low power usageGreetings
Thanks Eliovp , just tried this new bios and the cards defintlay seem to run cooler and more stable, howver I still get lower than stock when I use dcri over 20 for Sia coin.
I'm seeing around 22 mhs eth and 390 sia with my normal dcri 30.
With it lowered to 20 I get 26 mhs/eth and 200 SC
Maybe its my drivers ? I'm using the latest Driver 16.8.2
funny thing is when the miner initlally starts I see the expected rates : 26.5 mhs eth and 400 SC then it immediately drops down to 21 eth hmm