tell me if you guys have any issues.. or think of ways to make it better.
With stock settings and also sidehack mod, I think every time cgminer restarts and loads/connects the fans shoot 100% for 30 seconds or so as they settle into their manual settings (my ambient air is cool so I set to 60%). I assume there is no way to control this as the script can't run until after cgminer loads? Or is it only with power cycles that the fans will blast after the script is running? Basically it would be nice to avoid the unnecessary startup fan blasts.
i dont understand what you are saying..
the fans only go to 100% when the miner itself is first powered on.. then it reboots and the fans are set to the speed you specify.
my script doesnt reboot the whole miner, just cgminer.
the only time my script sets the fans to 100% is if the boards go over 70c.
unless it needs 100% to keep them between 60-65 avg temp.
my s7s are usually around 40-45% fan.