Hi, Im having trouble with nanopool's guide for speed results.....
My miner reads 560h/s to 565h/s however on nanopool 6hrs reads 510h/s and 2hrs to 24hrs not much different. Im losing about 50+h/s. Fees would be 2.5% which is about 15h/s. Does anyone else have this problem with nanapool under cutting or is it just me....
My miner reads 560h/s to 565h/s however on nanopool 6hrs reads 510h/s and 2hrs to 24hrs not much different. Im losing about 50+h/s. Fees would be 2.5% which is about 15h/s. Does anyone else have this problem with nanapool under cutting or is it just me....
I had that problem, and others too. Moved to flypool and the problem was gone...
sir in flypool if i setting i (intensity) more than 0, windows hang
any guide ?
edit :
now 0 also hang
Have you undervolted and overclocked?
I had something similar on my 390X rig, I used to use an optimized bios I had made for ETH, but anything even with -i 0 would hang the gpus within 30-60 seconds. now with the core at 1000mHz and the voltage at 1150mV it's rock stable.