Re: Claymore's ZCash AMD GPU Miner v7.0

Has anyone else experienced an issue with Claymore ZCash Miner v7.0 regarding only one of the GPU's working at half it's strength?

http://imgur.com/e9ufHz7

These three rigs are using all 480 8GB Sapphire Nitro+ cards.

All of the Sol/s is great except that one...

I have hard reset, checked all the cables, removed the overclock, and switched the bios yet nothing will budge it.

No matter what I do; I can't bring it up to speed. The lazy swine.

Does anyone have any suggests?

maybe try to put a monitor on this card

Does it have to be a monitor or can it just be a adaptor? Sure I read earlier in the thread people have been using cheap adaptors from ebay/amazon to help fix this.

For me an adaptator never work only, custom adaptator maybe or dummy plug like this
http://www.ebay.fr/itm/5-PACK-DVI-Graphics-Card-Display-GPU-Detection-Monitor-Dummy-Plug-Adapter-VE-D11-/271595376795?hash=item3f3c58909b:g:4wEAAOSwQYZWzkGt

You know that they talking about RX480 cards...you post link to DVI dummy!?

yes I know, you should check sapphire nitro rx 480 not ref modele
http://sapphirenitro.sapphiretech.com/en/480-8.html

I don't know if hdmi-vga dummy plug will work on rx 480.. but I use old monitor with vga connector & connect it to my sapphire nitro rx 480 4gb with hdmi to vga adapter.. and it works.. i can play game or mining normally..

here's the hdmi to vga adapter i use:
https://www.tokopedia.com/rap-eo/kabel-hdmi-to-vga-female-adapter

maybe we can also make dummy plug with this adapter using resistors like in dvi to vga dummy plug... like this one:
https://www.youtube.com/watch?v=6AwxoIfic4k

Custom dummy plug will not work. The RX470/480 only have DVI-D and the adapter plugs convert DVI-A to VGA.
I recently bought this one and can confirm it works very well http://www.ebay.com/itm/191847993749