Post
Topic
Board Altcoins (Deutsch)
Re: [DeM] Deutsche eMark - ein deutscher Cryptocoin - SHA256,POS&POW
by
Buchi-88
on 16/12/2016, 20:27:42 UTC
Ha,

jetzt hab ich den deutschsprachigen thread wiedergefunden  Cheesy Cheesy Cheesy

Hier ist der Link auf das fertige 1.1 GUI Wallet für den Raspberry Pi:

https://mega.co.nz/#!Ch5jlAbR!Uz74sT_QmIc1aB7gAL7WcAnCnb1QM4-qOOWx1buygX0

Vorm ersten Start müssen noch einige Bibliotheken geladen werden:

sudo apt-get update

sudo apt-get install qt4-qmake libqt4-dev build-essential libboost-dev libboost-system-dev libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev libssl-dev libdb++-dev libminiupnpc-dev git

Eigentlich nicht alle, aber der Einfachheit halber hab ich das von der Kompilieranleitung einfach kopiert  Cool Cool



Und hier ist die Anleitung zum Kompilieren:

--------------------------------------------------------------------------------------------
Betriebssystem: Raspbian wheezy vom 24.12.2014

Terminal öffnen

sudo apt-get update

sudo apt-get install qt4-qmake libqt4-dev build-essential libboost-dev libboost-system-dev libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev libssl-dev libdb++-dev libminiupnpc-dev git

git clone https://github.com/emarkproject/DEM derzeit (09.04.2015) ist da die alte 1.0 Version. Wenn ihr die 1.1 kompilieren wollt, dann unter releases das entsprechnde Archiv holen und auf den Raspi kopieren:
https://github.com/emarkproject/DEM/releases

cd DEM

sudo nano eMark-qt.pro

mit strg w nach msse2 suchen
vor die beiden Zeilen mit msse2 jeweils ein # setzen

strg x und mit j bestätigen

sudo qmake eMark-qt.pro

Ausgabe:

Project MESSAGE: Building with UPNP support
Project MESSAGE: Building with LevelDB
Project MESSAGE: Building with UPNP supportProject MESSAGE: Building with LevelDBProject MESSAGE: Warning: unknown QT: widgetsRemoved plural forms as the target language has less forms.
If this sounds wrong, possibly the target language is not set or recognized.
Removed plural forms as the target language has less forms.
If this sounds wrong, possibly the target language is not set or recognized.
Removed plural forms as the target language has less forms.
If this sounds wrong, possibly the target language is not set or recognized.
Removed plural forms as the target language has less forms.
If this sounds wrong, possibly the target language is not set or recognized.

sudo make

einige Stunden warten bis es fertig ist

sudo strip eMark-qt

Starten mit

./eMark-qt

Das Laden der kompletten Blockchain kann ca. einen Tag dauern.
----------------------------------------------------------------------------

Gruss

teppichtasche







Ich habe das ganze über den TightVNC Server laufen, und mein Problem dabei, ist ein Stromausfall, startet der Pi neu inkl.TightVNC Server, aber wie kann ich unter demTightVNC Server, die ./eMark-qt als Autostadt nach dem Stromausfall starten lassen?

Jemand eine Idee?