I have antminer S9 , the BMminer version 1.0.0 ..
I want do this rule : when Temperature greater than or equal 67 C stop miner . I try do it in rules tab and I edit (Device temperature ) , in actions tab I add Miner command (stop miner ) . but nothing happened when Temp exceed 67 C and greater ,the antminer still work .How can do this action ?
Can you try to add another action to the same rule? For example to show a Notification as well. By doing that we can figure out if the rule is triggered or not.
Is the Antminer running in Privileged API mode?
I do another action (notification) it work good but stop miner not work .. see the picture :
http://imgur.com/aMX5ddfI don't know what (Privileged API mode) mean and how can I do that ?
antminers can i can't say how i refuse to buy any thing above a S5 that was my last antminer ill ever own about then bitmian became total ass holes and that means Full API access: Privileged API mode, i believe to turn that on in AWESOME miner and control it with awesome you need either PRO or the Premium version of awesome but you can with any antminer with any version of awesome, i believe but then it has to been done at the miner level but if you know how you can at the miner level and with SIDEHACK about to come out with bitfury chip miner upgrade kits for the old S1 to S5 heat sinks which i have a lot of laying around , i won't ever have a need for bitmain miners, again .
Look at ANTMINER API ACCESS in the option menu of awesome, that does it for S7 and up . S5 have it on by default . I use Avalon 6 and turn it on with CGMiner with a command line in minera then network watch it thu awesome.