Re: Antminer L3 - 250mh - 400watt Scrypt miner coming soon
Just had a second order arrive today and one of the boards is not showing up on the miner. So I have an email off to Eastshore to see what they are going to do to address this. Not to happy right now. 
UPDATE: Found the problem, loose cable on one of the controllers. Second unit now has all boards hashing. However this second unit appears to run much hotter temps than the first unit I received. Will have to monitor. Watts used at the wall are 384w
Cool, I find it amazing that out of no where a miner shows up using less than 1/2 the power of the best thing going. UPDATE: Found the problem, loose cable on one of the controllers. Second unit now has all boards hashing. However this second unit appears to run much hotter temps than the first unit I received. Will have to monitor. Watts used at the wall are 384w
And you can carry on a conversation in the same room... No hearing loss required with the L3. LOL
I changed the diff setting on the L3's to vardiff and they seem to be hashing a little bit better. So the only setting I needed on Prohashing was the h=3. So far so good. The L3 hashes better than my A4's did for me. So I am pretty happy about that.