My rig contains 5 Rx470. I'm reduced voltage offset from wattools at -15 (15*6.25mv). Power draw from the wall for full rig @560-570W.
XMR use the lowest power my full rig (5*700H/s) draw power at wall @460-470W.
Hi, I would like to share my information
A) Sapphire Nitro OC AMD RX470 (Core/Mem 1100/300) only core clock will effect the hashrate
B) 600MH/s
C) 100W from the Wall
Whoa, 100W?? That sounds crazy low. I thought Pascal consumes more power than ZEC or ETH, and those draw ~140-150W on the 470. Any crazy bios mod or undervolt?A) Sapphire Nitro OC AMD RX470 (Core/Mem 1100/300) only core clock will effect the hashrate
B) 600MH/s
C) 100W from the Wall
Hey guys,
I run www.mycryptobuddy.com - a site which displays which coins are most profitable to mine for a given GPU (or for a custom setup). I'm in the process of adding PascalCoin to the list of coins, but I need some more information about the mining speed and power consumption for different cards.
If you've tried mining PascalCoin, could you please share the following?
A) Video card (rx 470, r9 7950 etc) and brand
B) PascalCoin mining speed
C) Power consumption, if available
Thanks!
I run www.mycryptobuddy.com - a site which displays which coins are most profitable to mine for a given GPU (or for a custom setup). I'm in the process of adding PascalCoin to the list of coins, but I need some more information about the mining speed and power consumption for different cards.
If you've tried mining PascalCoin, could you please share the following?
A) Video card (rx 470, r9 7950 etc) and brand
B) PascalCoin mining speed
C) Power consumption, if available
Thanks!
wattools is a software that can modify voltage without flashing you RX400 card. you can try by this link http://www.overclock.net/t/1609782/watttool-a-simple-tool-that-combines-overclocking-with-vrm-monitoring-tweaking-for-rx-400-series. Flashing VBios require for Memory strap to change memory timing at higher memory clock to increase ethash rate with the same power usage.