Hello people and good to be here.

I am new in mining but old in PC world.
Recently I bought my first rig to get hobby.

I’m currently running:

MB – AsRock H81 PRO BTC v2
CPU – Intel Celeron G1840
RAM – Patriot 4GB @ 1600
SSD – SiliconPower 120GB
PSU – 2 x ThermalTake 730W
GPU - 6 x Sapphire NITRO+ RX 480 8GB – (11260-07-20G) - STOCK BIOS/ no OC
PCI – 6 x Resizers x16 to x1 (USB)

So I set it up and am running Windows 10 and Claymore Dual miner v7.4.

PROBLEM:

After 5-10 minutes of running in ether single or dual mode I would get: WATCHDOG: GPU (x) hangs in OpenCL call. Miner will “restart” and will not start again.

TRIED SO FAR:

-   Reinstalling Windows 10
-   Running both single or dual mining
-   Running on stock drivers then 16.9.1 all the way to latest
-   Removing one or more cards
-   Switching PSU to run one to four cards and back and forth
-   Switching resizers
-   Running cards in both “OC” and silent mode (bios switch)
-   Virtual Memory set to 16GB+

I think a listed all.
So is there any solution to this issue since I’m pretty out of them right now.