I dont know why ppl connect 2 or more psu`s.
Problem is equalizing currents, that always destroy one of psu. Faster or slower but always do this.
Regards
I don't agree with you, i use dual psu in all my 12x rigs, and it work beautifully, you just have to link them properly, and respect some guideline with load balancing & power distribution, if you don't have limited space (because of course the rig is a bit bulkier) it does a good job at keeping the psu bill low because 2x650w psu will cost less than 1x1300w psu of the same quality, you also get more cables so it save on clutter of added adapters & such. Especially for me because i was facing huge issue of connecting everything since my gpu's were using 2x8pin power supply input. It also smooth out all the power through the rig.
Thanks to both of you. So Monero is where it's at at the moment? It's too late to not get the 6gpu rig. I had ordered everything before I posted

. I am going to put some more money to mining by summer so I'll make sure I do that first. I can start with the money I was going to put into a Baikal mini miner. It's too old now to ROI I think. Maybe I'll do 50% Dash and 50% Monero just to hedge?
GPU mining is more or less always viable, ASIC mining is really hard to ROI, i don't recommend it if you are going to be a "casual" miner, as for GPU mining, just use whattomine website to give you an idea of current profit/revenue, XMR (Monero) isn't very good to mine with nvidia nowadays, you have alot more stronger contenders (refer to my earlier post about this)
Here is a basic WTM link with base 4x GTX 1070, to you after that to tweak with your numbers & wattage & electrity cost, but it'll give you a rough idea already.
WTM - 4x GTX 1070 - immediate profit