Quote from: ecohash on February 13, 2017, 10:25:32 PM

Quote from: slejvi on February 12, 2017, 07:26:39 PM

Quote from: ecohash on February 12, 2017, 04:12:26 PM

I see here psu specialists. Molex is 4 pin connector.

You have ~12V yellow cable
GND 2 black ones
1 red with ~5 V

And betwen yellow and red is ~7V

But problem with molex is that have always small cross section.

Or you need other psu or you can try to make custom cables like that:

I am using this in one card (bought psu with not enought 6/8pin pcie cables)

3/4 molex -> 6/8 PCIE connector. And remeber, all molex must have another line, not 1 cable with 3 molex and connected to card <- this still be 1 cable.

I have super flower leadex 1600w GOLD 93+% ef. Have enought cables to use 6 PIN risers and power cards

i have one of this bit like is see he is missing on +12v dc and one gnd then it has to be this that my gpu is not running
http://www.ebay.com.au/itm/GIGABYTE-2-x-Molex-to-8-Pin-Power-12CF1-1PW013-11R-Molex-to-VGA-Power-Cable-/281517349096

then i need this one
http://www.kleinspul.nl/index.php?productID=1819

if iam correct Huh

?

As you can see this is good cable, but is better to have more 12V cables then GND. In molex allways 2 midle cables are GND. Right one (90 deggres at bottom), is 12V (should be yellow). Good if you have litle skills and can make this cable alone. Buy PCIE 6/8 PIN female connector, 1-2 m good cooper cable, and 2-3 molex and both pins. In my country all cost less then 1 molex -> PCIE connector, and i have guarantees, that i have very good cables that are not hot after 10 min of mining.

tnx for all infos but i have bought new psu and it work prfect now and i can add the 6 gpu in my sistem Wink