Post
Topic
Board Mining (Altcoins)
Re: Claymore's ZCash AMD GPU Miner v12.0 (Windows/Linux)
by
Mitja1998
on 18/02/2017, 07:35:09 UTC
modded rx 470 -285 h/s (80W in Afterburner), modded rx480 - 305 h/s (86W in Afterburner), modded HD7950 - 245 h/s (around 110w I think). Very nice results Claymore, you made equihash most profitable algo at nicehash again.

would you pls post your settings?

BR
rx470 4gb: one has 1256 mhz and other has 1260 mhz stock clocks, mem clock is 1750 mhz. Voltage is 985 mV.
rx480 8gb: core clock is 1266 mhz stock and mem clock is 2000 mhz. Voltage is 961 mV.
hd7950 3gb: core clock is 900 mhz, mem clock is 1250 mhz all stock. Voltage is 956 mV.

Thanks alot. but one thing i dont get i was searching and searching and then i gaved up.
In Afterburner the Core Voltage (mV) is set to 0. what do i change there? i can change from -100 to +100.

BR

You change mVolts. If your card is running on 1120 mV and you change it to -100 then you get 1020 mV. But I couldn't lower it more so I changed it in gpu's bios to 985 mV

is it save to change it to -100? sry for the noob question but i have no clue of undervolting and what will happen if i undervolt to much.

BR
I think it is safe. If you undervolt too much, card frezzes and you need to restart computer.