OpenCL error -38 - cannot write buffer for DAG GPU0 WATCHDOG: GPU error, you need to restart miner!!! R9 380 1 card . Please help
IF IT IS A 2GB CARD, IT WON'T WORK--
The Ethereum DAG file is now too large for 2GB cards. You will have to switch to an Ethereum clone-coin that is at a lower epoch if you wish to mine Dagger-Hashimoto algorithm. --scryptr
If you are in the know about the problem it is better to be silent. I have two of the same cards and they run on air without any problems. You didn't even read my question! But if you still believe in the great DAG file - then it's your problem! Back to the question!
YOU CAN GET THAT ERROR ON A CARD WITH MORE THAN 2GB--
I read your question, and it did not have much supporting information. If your card has a portion of its memory allocated, there is not enough memory left to load the DAG file, and a reboot may be required to release the allocated memory. This can happen on a 3 or 4 GB card when the miner had to restart without a reboot. If the memory is not released in the restart, the DAG won't load.
If the DAG is not your problem, I don't know what is. Perhaps you should not ask if you don't want people (I am a person, and not your personal, unpaid servant) to attempt to be helpful. Good luck in your mining efforts. --scryptr