Good Morning people.
I have a problem with Claymore, He starts work is fine, but later he crash and freezing all the Rig. Install windows again, download a new version of Claymore and stay the same.
Need help.
claymore miner issue fixes:
- read the "readme.txt" for other settings
- make sure you are using the right drivers
- watch and play with your overclocks
- look at your "-i" options, make sure your intensity is not too high
other issues: (getting into GPU mining has a prerequisite which is you should know how to troubleshoot OS and PC hardware) -> i believe this is not claymore's problem anymore
- riser issues
- PSU issues
- motherboard issues
- GPU issues
- HDD issues
- RAM issues
- temperature issues
yesterday one of my rig freezes and windows crashed after mining started for a few seconds...it was a HDD bad sector issue.. find the source of problem, you can do it.
good post
i mix and match quite a bit and even have risers from when the first came out (never the ribbons tho)
first always check the riser and power supplies, that sata connection is dead important not to have too much load on a single line
if claymores software encounters an issue then it will be in the logs.... start with one card and test over 12/24 hrs, adding one more card at a time, might also be good to clean up drivers and reg entries using DDU
was having a few windows issues recently as well, tried loads of things to fix it and to my surprise all it needed was a rollback using system restore settings, perfect after 3/4 hrs reinstalling and testing lol