Dear Toecutter, I think the current way durability works is pretty sucky.
I'm losing a durability point practically every time I get shot.
Once the ship loses enough durability the equipment starts to lose durability every time it's used
Equipment fails often once it's below 50/XX, and you have to keep repairing to stay in business, and you're draining your maximum durability fast.
I think the rate of drop is unsustainable given the amount of sats you can make these days
I'm losing a durability point practically every time I get shot.
Once the ship loses enough durability the equipment starts to lose durability every time it's used
Equipment fails often once it's below 50/XX, and you have to keep repairing to stay in business, and you're draining your maximum durability fast.
I think the rate of drop is unsustainable given the amount of sats you can make these days
That's what I'm talking about all the time.
And yesterday, at EVERY attempt to produce something burned. It was very bad with 20nm PCB. Since it was so bad that in an attempt 8 COPPER PLATES burnt. On average, there were 3 to 4 plates in EVERY attempt. So please do not tell me that nothing has changed. I do not believe you. It was the same with the equipment. I had a used laser in use. durability 5/5. Energy Beam MKI. So I shot 3 times on a pirate and each time I lost 1 point of durability. The legacy of failure after 3 times will use was a durability of 2/5. Please do not tell me I just had a bit of luck or it would have been on the other equipment. No the other equipment was repaired so should not happen. I'm sure I'm not the only one to do it.