I could never get the command line to work properly.
I tried this
cd\
cd watttool
start WattTool-0.7.exe voffset(0)=-16
ping 8.8.8.8
start WattTool-0.7.exe voffset(6)=-16
ping 8.8.8.8
start WattTool-0.7.exe voffset(12)=-16
ping 8.8.8.8
start WattTool-0.7.exe voffset(18)=-16
ping 8.8.8.8
start WattTool-0.7.exe voffset(24)=-16
ping 8.8.8.8
start WattTool-0.7.exe voffset(30)=-16
pause
Doesn't work. Just loads the program
that looks wrong to me
i create multuplie empty profiles first then set them the way a want , save them then i run the tool
start WattTool-0.91.exe profile1.ini profile2.ini profile3.ini profile4.ini profile5.ini profile6.ini
sample profile
[General]
NoGUI=0
[Adapter]
Index=30
[GPU]
Mode=Manual
P1_CLK=466
P1_VID=818
P2_CLK=751
P2_VID=824
P3_CLK=1019
P3_VID=950
P4_CLK=1074
P4_VID=993
P5_CLK=0
P5_VID=0
P6_CLK=0
P6_VID=0
P7_CLK=0
P7_VID=0
[Memory]
Mode=Manual
P1_CLK=1950
P1_VID=1000
[Fan]
Mode=Manual
MinRPM=1696
MaxRPM=1696
TargetTemp=75
[Power]
Mode=Manual
MaxTemp=90
PowerTarget=20
[I2C]
PhaseGain=000000
VoltageOffset=-16
Marvell, what values would you recommend me to use for a rig running 6 Rx480 8GB ( 3 asus strixx and 3 msi ) on a Evga 1200w P2, PSU.
i have downloaded Wattool it looks very simple to use.
thanks for the input guys im learning everyday.