Re: Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order
There use to be such high demand for manual control ability with autotune S9 models, but now, has someone tried my method with S9?
I've done this successfully to my two R4s.
I've done this successfully to my two R4s.
This is also S9 related, so I thought to share this here as well.
If there is someone with a desire for non-autotune settings, be brave and please report if you get same results as I had
Originally posted in the R4 thread https://bitcointalk.org/index.php?topic=1597639.msg18267781#msg18267781
If there is someone with a desire for non-autotune settings, be brave and please report if you get same results as I had
Originally posted in the R4 thread https://bitcointalk.org/index.php?topic=1597639.msg18267781#msg18267781
Well, this is an interesting find and I thought I'll share it with you. 
I had a problem booting my Antminer R4 8.0 Th/s, batch 2, autotune-model.
So I went looking in here:
Bitmain.com: Three Ways to Restore Factory Settings (R4/S9/T9)
https://enforum.bitmain.com/bbs/topics/3957
I used the last option in the list, IP Reporter button restore.
My miner restored with firmware Aug. 9 2016 and autotune settings were gone.
I am now suddenly able to control frequency and custom fan settings.
This was not my original problem, but I'm happy with it.
My original problem was that the miner jammed somehow in the booting process and didn't even show up in my router ip list.
I had a problem booting my Antminer R4 8.0 Th/s, batch 2, autotune-model.
So I went looking in here:
Bitmain.com: Three Ways to Restore Factory Settings (R4/S9/T9)
https://enforum.bitmain.com/bbs/topics/3957
I used the last option in the list, IP Reporter button restore.
Quote from: Bitmain
Usage: Please power off the miner, then hold down the IP Reporter and dont release it. At the same time, please power on the miner.
Releasing the IP Reporter after 5 seconds, the machine will automatically restore factory settings.
Releasing the IP Reporter after 5 seconds, the machine will automatically restore factory settings.
My miner restored with firmware Aug. 9 2016 and autotune settings were gone.
I am now suddenly able to control frequency and custom fan settings.
This was not my original problem, but I'm happy with it.
My original problem was that the miner jammed somehow in the booting process and didn't even show up in my router ip list.