I can see 2 of the boards are not hashing here is my asic status
Any help is appreciated.
Uptime:80 | FPGA ver:100
-----BOARD-0-----
PSU[UNKNOWN]: 0->(5w/5w)[5 5 5] (->5w[5 5 5]) (lim=1350) 0c 0GH cooling:0/0x0
-----BOARD-1-----
PSU[UNKNOWN]: 0->(171w/171w)[171 171 170] (->171w[171 171 170]) (lim=1350) 0c 304GH cooling:0/0x0
-----BOARD-2-----
PSU[UNKNOWN]: 0->(5w/5w)[5 5 5] (->5w[5 5 5]) (lim=1350) 0c 0GH cooling:0/0x0
-----BOARD-3-----
PSU[UNKNOWN]: 0->(193w/193w)[193 193 193] (->193w[193 193 193]) (lim=1350) 0c 333GH cooling:0/0x0
LOOP[0] OFF TO:0 (test serial failed or something)
0: disabled (i2c good, no OC)
1: disabled (i2c good, no OC)
LOOP[1] ON TO:0
2: DC2DC/1/:[vlt1:673 vlt2:677(DCl:794 Tl:794 Ul:727) 73W 108A 48c] ASIC:[110c (125c) 835hz(BL: 835) 6 (E:192) F:0 L:0]
3: DC2DC/1/:[vlt1:673 vlt2:677(DCl:794 Tl:794 Ul:727) 63W 94A 49c] ASIC:[ 85c (125c) 745hz(BL: 745) 7 (E:192) F:0 L:0]
LOOP[2] OFF TO:0 (test serial failed or something)
4: disabled (i2c good, no OC)
5: disabled (i2c good, no OC)
LOOP[3] ON TO:0
6: DC2DC/1/:[vlt1:671 vlt2:677(DCl:794 Tl:794 Ul:727) 71W 105A 46c] ASIC:[ 85c (125c) 825hz(BL: 825) 7 (E:193) F:0 L:0]
7: DC2DC/1/:[vlt1:673 vlt2:677(DCl:794 Tl:794 Ul:727) 84W 124A 58c] ASIC:[120c (125c) 905hz(BL: 905) 7 (E:193) F:0 L:0]
[H:HW:638Gh (500),W:293,L:0,A:4,MMtmp:0 TMP:(22)=>=>=>(38,43)]
Pushed 11 jobs , in HW queue 4 jobs (sw:0, hw:0)!
min:16 wins:27[this/last min:5/22] bist-fail:10, hw-err:0
leading-zeroes:41 idle promils[s/m]:0/0, rate:768gh/s asic-count:12 (wins:13+14)
Fan:90, conseq:200
AC2DC BAD: 0 0
R/NR: 68/0
RTF asics: 0
FET: 0:9 1:9
0 restarted 0 reset 0 reset2 0 fake_wins
0 stuck_bist 0 low_power 0 stuck_pll 0 runtime_dsble
0 purge_queue 0 read_timeouts 0 dc2dc_i2c 0 read_tmout2 0 read_crptn
0 purge_queue3 0 bad_idle
0 err_murata
Adapter queues: rsp=0, req=24