For all of you guys i made a custom bios from the one in the main post.
You won't need any wattool,wattman,afterbuner,trixx or any other software of that type, i set everything in the bios like Insider00 did with wattool, so :
Def gpu clock : 1144 Mhz
Def mem clock: 2150 Mhz
Mem straps 1625
VDDC (gpu voltage) set at 925mV
TDP 120w
Set fans to hold cards at about 70c, so you don't need fan regulation either
Before flashing remove ALL software that you used before for manipulating (wattool,wattman,afterbuner,trixx...).
Then clean all video drivers with DDU.
Flash bios.
Reboot, reinstall video drivers.
Test.
Enjoy
http://www.filedropper.com/s480-8gb-micron_______________________________________________________________________________
______________________________________
_______________________________________________________________________________
______________________________________
hey DOk
what if i brick my card ?
can it be fixed by just restoring the old rom ?
card = Sapphire RX 480 8GB
NON PLUS MICRONbtw my current settings are in this link
https://lazyboi-1.tumblr.com/image/160311333430getting 24-25 in dual mining and in single mining getting 26 mh stable without BIOS MOD