So I've been running EthOS on stock settings for a few days now and getting around 24mhs with my Rx470's. I tried to overclock my cards today and when I do one of my cards goes to 28-29mhs and the other runs at 8-10mhs. Here is my config files I'm using.
globaldriver amdgpu
globalmem 2000
globalpowertune 6
globalminer claymore
globalfan 75
maxgputemp 80
stratumproxy enabled
proxywallet 0xf95cbac66ada28d2b23d198c892479ad0c3a8b44
Proxypool1 us1-etc.ethermine.org:4444
proxypool2 us1-etc.ethermine.org:14444
flags --cl-global-work 8192 --farm-recheck 200
I've been reading on the EthOS FAQ about overclocking individual cards. The command in the config file is
mem [worker]: set the mem clock of individual GPUs on a single rig
But I'm not sure what to put in [worker]. How do I find out what worker is the GPU so I can manually overclock each card?
Worker is your hostname.
mem 123456 1000 1001
mem 654321 1004 1005
This will set the mem for
Rig 123456
Gpu0 to 1000
Gpu1 to 1001
Rig 654321
Gpu0 to 1004
Gpu1 to 1005
This is used if you have a remote conf file. Local you just need to add the setting for that rig.