thank you for all your hard work!!
I am having an issue I haven't seen anyone else have as I have read/scanned through this thread, and I have been messing with it all night.
I have two rigs with 6 rx470's each,and thanks to simple miner os, I had them all mining at the same time. However when I dual mine with claymore 9.3 eth+dcr my mhz on cards on one rig stay at 7xxmhz instead of the 1100 or so I have them at. I believe this is why the hashrate is low on one rig when I dual mine. The one having issues are visiontek 4gb 470s on an ASUS h170 progamer board.
However I can use the eth miner just fine with the hashrate i'd expect for non-flashed/not overclocked cards. Any input is welcome!
Didnt have an issue with cards in windows 10 however I have never had all of them working. Thank you again! btw I am happy to donate/pay fee for your excellent service/software!
Can you try setting in Overclock:
1100/1900 and powerstage to 6 or 7
If this wont help try setting, also after you set those numbers please do "reboot"
core: 6
memory: 0
Thank you for your reply!
fyi they are visiontek rx470's
Yes I have attempted to set clock in overclock setting my memory runs at 1750, so I am not sure 1900 is best setting for mem, but I tried that anyway, but it reverts to 751 only when I dual mine on one rig. Powerstage set to 7, no change at all. If remove the dcr command line and use claymore 9.3, it will mine just eth at a normal hashrate. I've rebooted 40+ times. I am not sure what you mean by core:6 memory:0 but I tried setting core clock to 6 and memory to 0 and rebooting, and it launched with a core clock of 300 and didn't hash well. When I increase it, it the core clock will never go above 751 while dual mining.
The other rig that works well has different rx470's and a different main board, asrock h97(no problems at all).
** update I've also tried the beta updates for kernal and amd driver, no change. I have also removed 3 cards, and still no change while dual mining. Any suggestions are welcome