Re: Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order
Genie, that is the same old song from you once again and you are not helping anyone.
If you hate manual settings so much, then look away from posts related to it.
I had a success in reverting to a non-autotune firmware stored in the memory by using this method I posted two months ago.
This was done with R4. I have no autotune S9 to test it.
If you hate manual settings so much, then look away from posts related to it.
I had a success in reverting to a non-autotune firmware stored in the memory by using this method I posted two months ago.
This was done with R4. I have no autotune S9 to test it.
This is also S9 related, so I thought to share this here as well.
If there is someone with a desire for non-autotune settings, be brave and please report if you get same results as I had
Originally posted in the R4 thread https://bitcointalk.org/index.php?topic=1597639.msg18267781#msg18267781
If there is someone with a desire for non-autotune settings, be brave and please report if you get same results as I had
Originally posted in the R4 thread https://bitcointalk.org/index.php?topic=1597639.msg18267781#msg18267781
Well, this is an interesting find and I thought I'll share it with you. 
I had a problem booting my Antminer R4 8.0 Th/s, batch 2, autotune-model.
So I went looking in here:
Bitmain.com: Three Ways to Restore Factory Settings (R4/S9/T9)
https://enforum.bitmain.com/bbs/topics/3957
I used the last option in the list, IP Reporter button restore.
My miner restored with firmware Aug. 9 2016 and autotune settings were gone.
I am now suddenly able to control frequency and custom fan settings.
This was not my original problem, but I'm happy with it.
My original problem was that the miner jammed somehow in the booting process and didn't even show up in my router ip list.
I had a problem booting my Antminer R4 8.0 Th/s, batch 2, autotune-model.
So I went looking in here:
Bitmain.com: Three Ways to Restore Factory Settings (R4/S9/T9)
https://enforum.bitmain.com/bbs/topics/3957
I used the last option in the list, IP Reporter button restore.
Quote from: Bitmain
Usage: Please power off the miner, then hold down the IP Reporter and dont release it. At the same time, please power on the miner.
Releasing the IP Reporter after 5 seconds, the machine will automatically restore factory settings.
Releasing the IP Reporter after 5 seconds, the machine will automatically restore factory settings.
My miner restored with firmware Aug. 9 2016 and autotune settings were gone.
I am now suddenly able to control frequency and custom fan settings.
This was not my original problem, but I'm happy with it.
My original problem was that the miner jammed somehow in the booting process and didn't even show up in my router ip list.