...remember how you claimed lowering the speeds wasnt possible because of the design of the boards on the auto tuned miners and asking is pointless?? well asking got the change....the change you claimed was impossible to achieve....it was somehow achievable....
Despite your continued unwillingness to type in coherent English sentences....
1) That's mischaracterization of what I said. While I'm certain that you can take excerpts out of context to support your position, my position is, was, and always will be that:
a) The frequency is set in the PIC.
b) When the whole board is "underclocked" to a given frequency, many boards contain chips that would actually be
overclocked to a likely unsustainable frequency (i.e., a chip PICed at 415 set to 500).
c) When a device has an inherently diminishing ROI (which is compounded daily by increase in network size and bi-weekly by diff increase), manually setting that device to intentionally
further reduce ROI is counterproductive.
2) I'll believe that Bitmain will scrap a great many hours of writing code which physically protects the equipment that they sell (and provide warranty support for such unprotected devices), simply to pacify a handful of hobbyist consumers, when I see it.
what i said was clear and direct...so clear in fact u were able to form replies based on it so it must be pretty pretty good lol. so stop being a dramatic child that didnt get his way and move on to another topic please.
1. there u go again. an underclock option wouldnt be worth it if it was only able to chop off a small amount of speed from the freq. you said manual control of the firmware isnt able to be done and bitmain says it can be done and provided a solution for those that want to control the speed of auto tuned miners. also i believe my reply said to check the speed of the slowest board so you dont push that one harder by setting the freq manually right?? if u bothered reading my response before letting your fingers go on a rampage u would have seen that info. others saw it....why not u?? interesting.
but like we said before having the ability to run them at a lower freq at any given time is a feature that is available to everyone now even though you stated its not possible and that bitmain wont waste time giving it to us. u cant deny that fact buddy....sorry.
2. ok so do u believe it now than?? bitmain already gave us freq control....fan control is there as well you just have to compile the firmware yourself after altering the code to suite your needs. this was all said by bitmains engineer not by me. even thought its posted there in your face your still unable to accept the fact that your wrong. this is why im still undecided on u bein an old fart or some child with too much time on his hands. but at the end of the day i know a troll is there just to argue with people online. it doesnt matter if ur right or wrong u just like the argument so u can pretend like you dont see it if that makes u feel better. ik uk your wrong and thats good enough for me. it probably eats u up inside that uk u lost. does it physically hurt or is it an emotional kinda pain??
oh also running the machines hotter doesnt sound like much of a safety net. but u already knew that too lol. good talk buddy.