Hi all,
sorry for the silly wuestion, but of course I lack in knowledge of hardware, since I can't understand this point.
You said that every card+raiser need power supply, and you use PCIE 6-pin splitter for every card, so you have a total of 6 PCIE 6-pin cables. But if the connectors are only 2 in the PSU (in the picture OP posted I presume they are perif1 and 2, as he said), how do you connect them?
I know it is a dumb question, but I can't figure it out.
Thanks
The molex cables are connected to the "PERIF1" and "PERIF2". It looks like 6-pins on the PSU but the other end of the "PERIF1" and "PERIF2" are molex cables.
The 6-pin cables that we're talking about are the ones that are used on GPU's. On the PSU they are connected to the ones on the right (the VGA1-6). So there are 6x 6-pin cables. Molex cables, however, only have two connectors on the PSU (the "PERIF1" and "PERIF2").
He was talking about splitting those 6 cables to make them 12 in order to use them for both the GPU's and risers.
I hope that makes more sense.