This is a great tool! Managed to modify the bios (hex edit) of my sapphires nitro+ Samsung memory and now I can add voltage offset.
I found that setting a -150 actually gives -125 after flashing. -125 gives -100 so whatever you set seems to be off by 25mv.
http://imgur.com/a/7cI0Y
Prepping the rig for linux so I was wondering if anyone had any suggestions as how to set a proper fan curve through manipulating the numbers in the fan tab of SRB Polaris.
http://imgur.com/a/40p63
I found that setting a -150 actually gives -125 after flashing. -125 gives -100 so whatever you set seems to be off by 25mv.
http://imgur.com/a/7cI0Y
Prepping the rig for linux so I was wondering if anyone had any suggestions as how to set a proper fan curve through manipulating the numbers in the fan tab of SRB Polaris.
http://imgur.com/a/40p63
What version is this? I just downloaded 2.61 but it has a text field for voltages
The vbios is modded with a hex editor first. Very few cards, as I understand, have this voltage controller in place (not sure if the term is technically correct). The normal vbios would show what you are seeing. Didn't need the tool after all (i just put the right value in hex to give me needed offset) but this thread lead me to this tutorial: https://www.youtube.com/watch?v=sc5qFEIMYTs&feature=youtu.be. If you're computer savvy you should be able to figure it out
