Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.4 (Windows/Linux)
Hi, just started using Claymore on new Sapphire RX580 Nitro 8gb cards
The first rig everything worked fine. new w10 only / no drivers. Installed claymore 9.4 - only using start.bat
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool asia1.ethermine.org:4444 -ewal myaccountname.BC1 -epsw x
GPU temp and fan speed is displayed every 5 seconds in red.
I cloned the SSD for a new 2nd rig (identical hardware)
ran start.bat and mines fine, but there is no temp/fan speed. I tried adding -tt 1 or -tt 60 to the bat to no avail. I also tried Sapphire Trixx (no temp displayed) and GPU-Z (also no temp displayed).
I cloned to a 3rd new rig (identical hardware), and same issue.
Anyone else using RX580 having similar issue?
do not use RDP, read manualThe first rig everything worked fine. new w10 only / no drivers. Installed claymore 9.4 - only using start.bat
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool asia1.ethermine.org:4444 -ewal myaccountname.BC1 -epsw x
GPU temp and fan speed is displayed every 5 seconds in red.
I cloned the SSD for a new 2nd rig (identical hardware)
ran start.bat and mines fine, but there is no temp/fan speed. I tried adding -tt 1 or -tt 60 to the bat to no avail. I also tried Sapphire Trixx (no temp displayed) and GPU-Z (also no temp displayed).
I cloned to a 3rd new rig (identical hardware), and same issue.
Anyone else using RX580 having similar issue?
I have had nothing but problems cloning rigs this way. Every one I have used a copied HDD on I have needed to at least do a fresh driver install. I had weird problems like only 3 cards showing or like you have, incorrect or no fan control / temp reading 0.
I don't think it's the rx 580.
What program are you using to clone the HDD?
I've used clonezilla multiple times to clone rigs' HDD's & never had an issue.
I used macrium reflect - NOTE: spent most of the day troubleshooting.
and SUCCESS: the difference between rig 1 that was displaying temp and fan speed and the other rigs was how I plugged it into the tv or monitor.
Temp/fan speed will not work if you use onboard video, switched to RX580 card and now gpu-z and claymore report temp/fan speed
