112W are too high for 30mh. You can optimize it more.
How? minimum voltage I can set in claymore is 900mv (0.88v) and I get 105watts (full card) for 27Mh/s on your bios. Can it go lower in bios mods?
Does anyone know how I can get Gigabyte Radeon RX580 Aorus (Samsung memory) to hash at 28+
Mine was going at 24MH/s on EthOS, I flashed it in Windows and now my 6 cards only go at 17MH/s per card.
Is it possible and how?
Thank you!
1st post performance timings UberMix 3.1Mine was going at 24MH/s on EthOS, I flashed it in Windows and now my 6 cards only go at 17MH/s per card.
Is it possible and how?
Thank you!
http://www.overclock.net/t/1604567/polaris-bios-editing-rx5xx-rx4xx
Could elaborate please? Noob here. I know how to backup and flash via ATI Flash/Polaris Editor but don't know Ubermix.
I am using the performance timings Uber Mix 3.1 for Gigabyte Radeon Aeros RX580 8GB. I made a BIOS backup, then used the value stated: 777000000000000022CC1C00AD615C41C0590E152ECC8608006007000B031420FA8900A00300000 010122F3FBA354019 on the 2000 timing, yet now all my cards hash at ~17MH/s (stock was 24MH/s). Also, when I use ATI Flash and Program the BIOS, the machine says VBIOS updated successfully, but the machine hangs. I am also just trying to restore the original BIOS at this point to return to 24MH/s with no luck. Please advice
Thank you!
Give me your original BIOS. I will try to optimise it.