Post
Topic
Board Mining (Altcoins)
Re: Fourth alt coin thread last three got oversized.
by
philipma1957
on 04/06/2017, 12:31:38 UTC
Phil you're awesome!

I have some of those motherboards on the way, also I have a z170 with 4 PICEx16 - spacing is going to be tight for a 4 card 1080TI no riser but I'm going to run it just to see how long it can go. Should get here monday.

My new bottleneck - these stupid Corsair 750's only have 2... TWO! 4+4/6+1 power ports. The Rosewill 850w you suggested does have 4 PCIE power lines, so I just need  to get some more cables that have 2 sets of 6+2's in them, I ran out. I upgraded a dozen 1070's to 1080Ti's today - hardware always takes longer than you expect. Was expecting to unscrew, unplug, swap and be done. The power cords threw me for a huge loop.


I was thinking about running power from my 1500w EVGA but I actually don't have long enough cables for that either.

So back to the drawing board.


the gigabyte board will do 3  with no risers.   1080ti 1080 ti 1070 mini

here are two builds on the biostar z170
3 with no risers 1080ti 1080 ti 1070




Phil, appreciate all the effort and time you put in to share your knowledge.

Almost pulling the trigger on my first build, shopping list if you can see if I am forgetting anything:
-2x MSI 1080ti FE

-1x Zotac 1070 Mini   I have switched this out to thishttps://www.newegg.com/Product/Product.aspx?Item=N82E16814137092

-1x EVGA 850w Gold
-1x Gigabyte GA-Z270P
-1x Intel G4400 Skylake
-1x Crucial 4GB DDR Ram
-1x ADATA 128GB SSD

Puts the tab around $2.1k from Newegg, little more than your parts list from another thread where you were at 1950 or so.


note the msi aero   is shorter then the zotac  I switched to it.