This is the error im getting after just enabling the ETC mine and its options
/media/m1/1263-A96E/oneBash: line 876: ETCADDR: command not found
/home/m1/9.0/ethdcrminer64: /usr/local/cuda/lib64/libOpenCL.so.1: no version information available (required by /home/m1/9.0/ethdcrminer64)
����������������������������������������������������������������ͻ
� Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.0 �
����������������������������������������������������������������ͼ
This pool (eu1-etc.ethermine.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.This pool (eu1-etc.ethermine.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.Pool eu1-etc.ethermine.org removed from the list
and this is after addingg "-allpools 1"
/media/m1/1263-A96E/oneBash: line 876: ETCADDR: command not found
/home/m1/9.0/ethdcrminer64: /usr/local/cuda/lib64/libOpenCL.so.1: no version information available (required by /home/m1/9.0/ethdcrminer64)
����������������������������������������������������������������ͻ
� Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.0 �
����������������������������������������������������������������ͼ
ETH: 1 pool is specified
Main Ethereum pool is eu1-etc.ethermine.org:4444
AMD OpenCL platform not found
Driver 368.81 is recommended for best performance and compatibility
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
CUDA initializing...
NVIDIA Cards available: 1
CUDA Driver Version/Runtime Version: 8.0/8.0
GPU #0: GeForce GTX 1060 6GB, 6071 MB available, 10 compute units, capability: 6.1
Total cards: 1
ETH: Stratum - connecting to 'eu1-etc.ethermine.org' <0.0.0.0> port 4444
ETH: Stratum - Connected (eu1-etc.ethermine.org:4444)
ETH: Share rejected!
ETH: Job timeout, disconnect, retry in 20 sec...
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
Thanks in advance
Sorry about that, I should have tested the ETC coin choices after I modified them; I had left a space in each ... Fail on my part.
I have updated the newest oneBash link and it should work now.