Hi,
I have a problem with a rig.
Yesterday I removed an older R9 card. Now there are only 4 x RX480s in the rig.
When I started the rig, it started-stoped-started-stoped-started but no screen, no beeps, nothing.
I removed all unnecessary things (so only cpu and mem is on the motherboard) and stil the same!
The mainboard is an Asrock btc pro.
CPU is an intel G1840
Ii tried a couple of different memory.
Power supply is an EVGA 1600 G2.
Any ideas?
regards,
eric
First I would reset the CMOS.
i 've tried that!
But no luck!!!
Ok next I would try getting the board to boot to the bios.........nothing connected like you did before, except this time try only one stick of mem you dam sure is good. Try it in each slot to see if you can get to the bios. Don't forget to disconnect the drive your OS is on.
I did all that.
just motherboard, CPU and 1 stick of good mem. (no HD, no GPU, no nothing...)
Still the same!
eric
tried with other ram.
Still nothing.
1. main gpu must be in 16x pcie
2. monitor must be plugged in in the main gpu
if not, than nothig Will happend.
no boot.
if you have 6x gpu, monitor bust me connetcted to the gpu plugged in in the 16x pcie if not, no boot.
it is probbalby the psu is faulty. did you tried another psu?