Hi, overclocking is just not working, either the script is corrupted or some driver version issue.
Both "individual" and "all-cards" are not getting pointed clock settings.
I'm using the image for Z270.
It is always possible to have a bad image. To minimize the occurance of this always wait a few seconds after imaging indicates 100% before closing the imaging program, and always ensure you eject the usb before removing it from the build computer.
Which z270 image are you using? What motherboard and cards are you using?
Let me know.
Hi,
Here is the image:
8xOC_with_first_m2_ASUS_PRIME_Z270-A__nvOC_v0014.zip
Its the only one which i found on that point for my motherboard
Asus Prime Z270-PVideo cards are
Asus Dual 1060 6gb.
Also i saw some answers with screenshots about adding attributes.
Well i see a few empty rows after "coolbits" commands and then miner is running. I don't see these rows with attributes.
P.S for the guys with same cards, what i found on windows is
GPU clock -200 Mhz , and
memory clock +850 Mhz super stable at 23 Mh/s ETH.