Re: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.
Just tried to set up on your pool with this bat:
ccminerAlexis78.exe -r 0 -a skein -o stratum+tcp://hub.miningpoolhub.com:12016 -u *minername* -p x -i 25 --pee
It will not connect to server. What did I get wrong? Thanks
ccminerAlexis78.exe -r 0 -a skein -o stratum+tcp://hub.miningpoolhub.com:12016 -u *minername* -p x -i 25 --pee
It will not connect to server. What did I get wrong? Thanks
Hello! I have the same problem, but I'm using SimpleMining OS with claymore-eth-v9.4 and this config:
-wd 1 -r 1 -epool europe.ethash-hub.miningpoolhub.com:17020 -ewal YarMiner.$rigName -eworker YarMiner.$rigName -esm 0 -epsw x -allpools 1 -allcoins 1
It will not connect to the server too. What should I do? Thank you!
Use -esm 2 option.
-esm 1 is not compatible with 17020 port.
-esm 2, -esm 3
20535, 17020, 12020
-esm 1
20536
Could you implement static diff for DGB Pools. Otherwise you load the little miners with to high diff and they never get anything.
Since the explode of hashing there even with 12000MH Skein you don't have much luck most of the hash is vaporized of the speed new blocks comes and so you hash for nothing than just hot air.
Other pools did it too ...small miners will appreciate the option.
Since the explode of hashing there even with 12000MH Skein you don't have much luck most of the hash is vaporized of the speed new blocks comes and so you hash for nothing than just hot air.
Other pools did it too ...small miners will appreciate the option.
Try new digibyte skein port 20534
It's fixed diff 8
Finally got it going! How long does the auto exchange usually take once coins are sent to exchange?
4~6 hours for most coins.
Here's some info about it.
https://miningpoolhub.com/?page=account&action=autoexchange
Hi, can you explain in laymans words how the "auto switches" work? is that feature related to multipoolminer or what?
Thank you
Thank you
Auto switch provides one or two connection endpoint (port) but your mining coin may change as profitability changes.
Specific algo only switching is called algo switching. e.g.) ethash auto switching port is 17020
Multi algo switching is little bit complex, which can switch between different algo coins. You need to set hub miner to set Job which switch you want to join.
Auto switch is controlled from server.
Multipool miner is using auto switching for each algo but basically switching based on client side AFAIK.
Hi ! I just started with my first small test rig mining ETH with the claymore dual miner .
I'm getting:
"ETH: 06/04/17-03:22:20 - New job from europe.ethash-hub.miningpoolhub.com:20535 (FAILOVER 1)
ETH - Total Speed: 23.825 Mh/s, Total Shares: 6, Rejected: 0, Time: 00:08
ETH: GPU0 23.825 Mh/s"
I was allready googling the FAILOVER 1 but I could not find what it means. Can anyone help me please?
Thank you so much
I'm getting:
"ETH: 06/04/17-03:22:20 - New job from europe.ethash-hub.miningpoolhub.com:20535 (FAILOVER 1)
ETH - Total Speed: 23.825 Mh/s, Total Shares: 6, Rejected: 0, Time: 00:08
ETH: GPU0 23.825 Mh/s"
I was allready googling the FAILOVER 1 but I could not find what it means. Can anyone help me please?
Thank you so much
FAILOVER is a feature that you can list several pools to mine.
Miner will try to connect FAILOVER 1 first. If miner fails to mine from that server, then it will try next FAILOVER 2 server.
When FAILOVER 1 server comes up again, miner will get back to FAILOVER 1 soon.
This is mandatory thing for serious miners.
This site is horrible for Siacoins. Get around 600 coins/day and on this one I have got a lousy 0.00000000 (141.78481475) unconfirmed in 24 hours.
PPLNS Target 13359607
Round Shares [Submitted shares since last found block (ie. round shares)]
Est. Shares 4,700,792 (done: 176.19%)
Your Valid 2,973.8299
Your Invalid 8.7312 (0.29%)
SC Estimates
Block 69.02179212
Fees 0.62119613
Donation 0.00000000
Payout 68.40059599
Network Info
Difficulty 80,758,987,932,851,088.00000000
Est. Avg. Time per Block 10 minutes
Current Block 107977
So I still make way more on nanopool with 2% fee.
PPLNS Target 13359607
Round Shares [Submitted shares since last found block (ie. round shares)]
Est. Shares 4,700,792 (done: 176.19%)
Your Valid 2,973.8299
Your Invalid 8.7312 (0.29%)
SC Estimates
Block 69.02179212
Fees 0.62119613
Donation 0.00000000
Payout 68.40059599
Network Info
Difficulty 80,758,987,932,851,088.00000000
Est. Avg. Time per Block 10 minutes
Current Block 107977
So I still make way more on nanopool with 2% fee.
Siacoin pool is quite small and siacoin block time is long.
It fluctuates much. Someday you get much more and someday you get much less.
Check the Blocks page.
https://siacoin.miningpoolhub.com/index.php?page=statistics&action=blocks
Mining Pool Hub
Sorry for late announcement.
I was busy doing some backend work to protect server.
There was DDoS attack on 4th June around 7 PM UTC
Attack lasted about 1 hour.
Some servers were affected and some miners were unable to submit shares.
Sorry for inconvenience.
I recommend you to set failover server which will make you not lose any hashrate.
What's wrong with the monero pool?
LAST 20 BLOCKS FOUND
Block Validity Finder Time Difficulty Amount Expected Shares Actual Shares Percentage
1325416 70 left unknown 04/06 22:09:43 (UTC) 0.00 0.000000 0 0 nan
1325403 70 left unknown 04/06 21:37:16 (UTC) 0.00 0.000000 0 0 nan
1325371 70 left unknown 04/06 20:28:07 (UTC) 0.00 0.000000 0 0 nan
1325288 70 left unknown 04/06 17:28:16 (UTC) 0.00 0.000000 0 0 nan
1325286 70 left unknown 04/06 17:25:21 (UTC) 0.00 0.000000 0 0 nan
1325190 70 left unknown 04/06 15:07:27 (UTC) 0.00 0.000000 0 0 nan
1325174 70 left unknown 04/06 14:23:26 (UTC) 0.00 0.000000 0 0 nan
1325134 70 left unknown 04/06 12:57:50 (UTC) 0.00 0.000000 0 0 nan
1325106 70 left unknown 04/06 12:15:39 (UTC) 0.00 0.000000 0 0 nan
1325095 70 left unknown 04/06 11:57:58 (UTC) 0.00 0.000000 0 0 nan
1325069 70 left unknown 04/06 10:59:06 (UTC) 0.00 0.000000 0 0 nan
1325016 70 left anonymous 04/06 09:02:44 (UTC) 9,495,950,318.00 7.688613 593,496,895 109,900,325 18.52
1325007 61 left anonymous 04/06 08:48:29 (UTC) 9,493,456,384.00 7.686394 593,341,024 115,052,697 19.39
1324993 47 left anonymous 04/06 08:17:32 (UTC) 9,420,835,988.00 7.529301 588,802,249 466,379,015 79.21
1324954 8 left anonymous 04/06 06:49:15 (UTC) 9,372,858,417.00 7.537616 585,803,651 491,732,038 83.94
LAST 20 BLOCKS FOUND
Block Validity Finder Time Difficulty Amount Expected Shares Actual Shares Percentage
1325416 70 left unknown 04/06 22:09:43 (UTC) 0.00 0.000000 0 0 nan
1325403 70 left unknown 04/06 21:37:16 (UTC) 0.00 0.000000 0 0 nan
1325371 70 left unknown 04/06 20:28:07 (UTC) 0.00 0.000000 0 0 nan
1325288 70 left unknown 04/06 17:28:16 (UTC) 0.00 0.000000 0 0 nan
1325286 70 left unknown 04/06 17:25:21 (UTC) 0.00 0.000000 0 0 nan
1325190 70 left unknown 04/06 15:07:27 (UTC) 0.00 0.000000 0 0 nan
1325174 70 left unknown 04/06 14:23:26 (UTC) 0.00 0.000000 0 0 nan
1325134 70 left unknown 04/06 12:57:50 (UTC) 0.00 0.000000 0 0 nan
1325106 70 left unknown 04/06 12:15:39 (UTC) 0.00 0.000000 0 0 nan
1325095 70 left unknown 04/06 11:57:58 (UTC) 0.00 0.000000 0 0 nan
1325069 70 left unknown 04/06 10:59:06 (UTC) 0.00 0.000000 0 0 nan
1325016 70 left anonymous 04/06 09:02:44 (UTC) 9,495,950,318.00 7.688613 593,496,895 109,900,325 18.52
1325007 61 left anonymous 04/06 08:48:29 (UTC) 9,493,456,384.00 7.686394 593,341,024 115,052,697 19.39
1324993 47 left anonymous 04/06 08:17:32 (UTC) 9,420,835,988.00 7.529301 588,802,249 466,379,015 79.21
1324954 8 left anonymous 04/06 06:49:15 (UTC) 9,372,858,417.00 7.537616 585,803,651 491,732,038 83.94
Monero simple wallet hung rpc call and it was stuck for few hours.
It's resolved now.
Hi,
how long I need to wait for unconfirmed Siacoins to become confirmed? Mining now for day and a half and balance is still unconfirmed.
Thanks!
how long I need to wait for unconfirmed Siacoins to become confirmed? Mining now for day and a half and balance is still unconfirmed.
Thanks!
Usually it takes about a day. Sometimes when block is not found as expected, then confirmation would need more. This is coin's spec.
I tried to dual mine eth and sia, the two issues I got was
a) the miner was showing the same hash rate for sia and eth, and the sia hash rate was too low compare to my normal hash rate, about 50 times lower.
b) I was not getting any shares for ethereum, just a hash rate and 0 shares.
I am mining on a single M60 GPU, can it be that eth shares take "forever", or was there some other problem you think.
a) the miner was showing the same hash rate for sia and eth, and the sia hash rate was too low compare to my normal hash rate, about 50 times lower.
b) I was not getting any shares for ethereum, just a hash rate and 0 shares.
I am mining on a single M60 GPU, can it be that eth shares take "forever", or was there some other problem you think.
What is actual hashrate of each algo from your hardware?
It should be at least some certain value. If it's too low, then it will need more time for pool to recognize your hashrate.
The transfer/payout fees seem unusually high. Digibyte for example has a 1 DGB transfer fee. Suprnova has a 0.01 DGB transfer fee. I'd love to start using this pool for the multi-algorithm feature but not if I have to greatly reduce my payout frequency or deal with a much higher portion of my earning going to fees
Ah.. I lowered them to 0.01 DGB.
I hope you are satisifed.
Hello!
there are plans to add ZEN pool?
IMHO promising coin.
there are plans to add ZEN pool?
IMHO promising coin.
Yeah I'll add that coin.
IS this right.
I'm showing no shares.
I'm showing no shares.
Dashboard is cached, a bit delayed info.
Refreh this page later again.