Exactly, the powersave bios from Anorak.
CjMapope...
THANKS TO BOTH OF YOU! That is exactly the issue, I just tried putting +10% power... went from 20.6-21.6 to 24.3, the second card is running at 26 mh
110watts/card.
I'll be off for the day but I will try pimping a little bit, just to reach the best balance between performance and power usage :DD
THANKS again!!
Edit: I just tried +14... cards now runs at 114watts but getting 25.5 to 26 for first card and 26.4 for second ! I'm Lovin' It
Now 29-31MH/s RX 470/480.can i use a gigabyte gb elpida bios in xfx 4gb elpida bios? basically different just different brand
it's mainly dependant on the MEMORY type, but the brand has to match tho as well for Anorak's bios's
Honestly, you should just grab that 500 series easy editor someone posted it allows you to copy straps SO easy, and editing a bios custom yourself SEEMS daunting, but its really not, just stick to easy stuff, mem straps, TDP.
Also, don't fear TRYING one of Anorak's on a different brand, if the "sub-system id" is not an EXACT match ATIWinFlash wont do it anyways (well not by GUI,
and don't FORCE it in CMD or you will regret it! lol)
and ALWAYS back up the original BIOS's first!i edited my bios copied 1:1500 up to 1:2000 just like what the guides say. i got it up to 25.3mh/s. sadly an oc to the mem clock of even just +50mhz causes gpu errors.
so im stuck at 1100 core clock -96 voltage and stock mem clocks
i saw someone using elpida rams go up to 27 but i would be happy even at 26mh
I blame these 570 armor, they are trickier then the rest i swear haha
ya either find a matching Anorak Bios, or just sell them to a pro, or let them mine as is i guess, 2-3 mh/s+ is NICE, but ROI is so good on AMD its not too bad to NOT have it on ONE card (hope you never bought 12 ;p )
its nice you have them at -96 undervolt, at 25.5 is not bad man, prob 8o watts cant complain, try increasing that for stability on clock changes as well