Post
Topic
Board Mining (Altcoins)
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.5 (Windows/Linux)
by
BigWolf
on 13/06/2017, 15:29:03 UTC
Hi Everybody:

As a lot of messages I have seen here, I will start stating that I'm new here and new in mining, I started mining on friday, so far great, I have learnt a lot.

Right now I am mining with only 3 ASUS STRIX RX580 8GB OC, I have reduced the GPU clock in 5% and increased the memory clock speed to 2200 MHz, I have got 27.4 MH/s from 24.5MH/s, all this in AMDs Wattman, I had problems with the Asus Aura Light Effects, it seems it mess with the MH/s fluency, It is off and uninstalled now.

I have read about some widely known power adjustments, I understand the idea is to reduce voltage, so reduce power consumption, and increase memory clock speed, so increase MH/s, I have read too about doing it with AMDs Wattman or MSIs AfterBurner, and about bios flashing.

Knowing many has been able to get 29MH/s and 135 Watts of power from this cards, my questions so far are the following:

- There is need to flash a new bios to get the best performance?, if so, how many MH/s could I get?, or power reduction?.
- If I can get similar improvements with AMDs Wattman, which are the parameters I must use?.

Thank you very much for your support.

Carlos


If you're still using Windows (which is about as stable as a house of cards during a hurricane), then you can easily undervolt using MSI AB or whatever. Also, only 27.4MH/s? Those can't be Samsung, are they?

LOL.... "...If you're still using Windows (which is about as stable as a house of cards during a hurricane)..." ~ Wolf0, 2017

thanks for brief grin... needed one.... after the BTC bloodbath last night

27.5mh -- standard 1500 straps -- maybe Elpida memory

possibly SK-Hynix... lucky card this

Use GPUZ to find out memory type

It seems I am Lucky, these are Samsung, just checked.

What I need to change?, which settings must I use?.

Thx very much,


Damn! I thought copy+paste hackjob from 1750 -> 2000 would do better than that on Samsung K4G80325FB. I figured at least 28.5MH/s (which still, for Samsung, is not good) but... wow.

Wolf0, I'm a little confused on the memory issue.  What is the desired memory on the RX480?  Are there any to totally stay away from?  And how can you tell what memory a card has before you buy it.  I search for specs and it's not something that really seems to be listed.  Maybe I'm missing it.