Hi,
Thanks for all your effort. Once I get everything up and running I hope there is somewhere I can donate.
I need some advice though. I'm trying to flash the image to a 16gb ADATA S102 flash drive (Capacity shows 15.81GB in HDD Raw Copy), but it fails at 99%. is there something I can do, or should I get a bigger flash?
Thanks for all your effort. Once I get everything up and running I hope there is somewhere I can donate.
I need some advice though. I'm trying to flash the image to a 16gb ADATA S102 flash drive (Capacity shows 15.81GB in HDD Raw Copy), but it fails at 99%. is there something I can do, or should I get a bigger flash?
You should get a bigger one. But at times it will still work, so you can test it. If the system boots and starts mining, all is ok. Be patient, booting (depending on number of cards) can take a couple of minutes. Make sure you've read the OP, connect a monitor to GPU0 (not the internal video card) to see the booting process. All is automated, so just wait and see
..The image still works if capacity is over 15.8 as shown in tool. Less..it doesn't work. Fullzero explained it a bit better a few pages ago to me
Yea it doesn't complete the transfer and there's 1gb unallocated space. I'll just get a bigger flash.
I have been trying to find the smallest (actual) size USB that still works; last night I tested one of these:
https://www.amazon.com/dp/B002U1ZBG0 15.59gb actual capacity
The imaging only gets to 97% but it still works.
