okay I am running 3 card rig I got -pl 105 for all 3 cards to work.
I am pulling about 375 at the k-watt meter for 1275 sols.
I had to set each gpu individually to -pl 105
I can't run xmr cpu but not much coin no worries.
my bash had 11 gpus i deleted 6-10 kept 0,1,2,3,4,5
all seems okay
https://www.nicehash.com/index.jsp?p=miners&addr=1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje
can be viewed at link above. last one on the equihash list nvOCphiltest1
I am pulling about 375 at the k-watt meter for 1275 sols.
I had to set each gpu individually to -pl 105
I can't run xmr cpu but not much coin no worries.
my bash had 11 gpus i deleted 6-10 kept 0,1,2,3,4,5
all seems okay
https://www.nicehash.com/index.jsp?p=miners&addr=1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje
can be viewed at link above. last one on the equihash list nvOCphiltest1
That's some good hash power. I see there are many workers in your NiceHash.com link. How many rigs are you running and what cards? I've got a 4 card 1070 rig I'm ordering 2 more GPUs right now.
mostly 2x 1080ti plus 1x 1070 itx
Phil,
you can recomplile cpuminer-opt by opening the guake terminal and entering:
Code:
cd cpuOPT
and press enter
then type:
Code:
./build.sh
and press enter
this will recompile for your specific cpu; after it is done, if you change plusCPU to YES in oneBash and enter your XMR info you will mine a little XMR on the side.
When using a 1080ti I recommend only using 1 thread to ensure the GPU mining is not reduced at all.