So I been at it for 3 days now. I have a tb250 mobo and 5 gtx 1060 3gb cards I am working with. After setting them up and using msi afterburner using settings 65% power limit, 200 core speed, 750-800 memory and fan setting at auto and fixed at 75%. I cannot get more than 15 minutes of mining as afterburner becomes very unstable(laggy) as soon as profile is set. Letting it continue to mine in its laggy state it eventually drops a gpu temperature and fan reading to 0% and then slowly effects all other cards and it finally comes do a code 999 error on claymore stating cannot get current temperature (a internal driver error occured) .. So I used ddu and reloaded the latest drivers and reinstalled msi afterburner and are back at the same place with the same errors. I need guidance here. As I can not narrow down the issue. I have a suspicion that it might be afterburner causing it. Where do I start to diagnose.