For Equihash coins like ZEC, sol IS = hash for all practical purposes.



 Afterburner works nicely on all of the EVGA cards I own - and I prefer the "classic" interface (the current default interface is too "pretty" and HARD TO READ and less functional imo) and lower "overhead" to PrecisionX, plus PrecisionX in my experience with it crashes a lot more often.


 Mining speed for a lot of algos depends on memory speed to a significant degree - ETH in particular is hard memory limited after a point and VERY sensitive to memory latancy - not just on raw clock rate.

 Also keep in mind that you can't set a "boost" clock, you can only set the "base" clock.

 Most cards will run the GPU at a lower voltage when the TDP is dropped, but often can maintain their boost clock for a little ways into the undervolting - how far depends on the specific chip, as manufacturing variations will affect each chip differently - this is a large part of what the "silicon lottery" is about, getting LUCKY and ending up with a card that has a GPU that undervolts well and memory/GPU that overclocks better.


I had mine clocked up to +210 mhz and it worked fine with +120% power since I didn't check lower power settings.

BTW does BTC electrum wallet address change daily? I just realized today my receiving address in the wallet is different than what it was. THIS IS SO stupid because GPU worked day and night only to send waste money.
Now I have re-entered receiving address in the config file of Nemo miner again but this is so stupid that receiving address got changed on its own. Entire 24 hour period of work gone wasted.