I can't seem to get v16 to work on tb-250.
It boots up then terminal pops up and says:
dos2unix: converting file /media/m1/1263-A96E/onebash to unix format
xorg problem detected
restarting xorg
rebooting in 5
Have tried different USB's and also booting with only one card but still have the same problem.
Anyone know what the problem might be?
Have you waited for the second boot?
If you are using one GPU it is expected that oneBash will need to rebuild the xorg file and reboot before OC will work as intended.
It should work without rebooting on the second boot; unless you have connected the monitor directly to the motherboard (always connect a monitor to the primary GPU).
I have had one member report that their rig is caught in an infinite loop of reboots; so I would like to know if this is happening to you as well.