Re: [OS] nvOC easy-to-use Linux Nvidia Mining

Has anyone managed to burn img to a USB drive and copy oneBash into it under Linux?

I clone nvOC_v0016.img to USD as follows:

Code:

sudo dd if=nvOC_v0016.img of=/dev/sdd1 bs=1M

What happens later is that I cannot mount the usb in order to copy oneBash file to it. This is not unusual though. Burning ubuntu image into a usd results in the same unmountable drive, but it still boots fine.

Thanks

I am not sure; but I believe you would need to mount and then copy each partition separately if using dd; in order for the resulting usb to work as intended.

It is a lot easier to download https://etcher.io/ for linux and then use it to image a USB or SSD.

I have done this and can verify it works.

Is it possible to update from 15 to 16 or will I need to burn the USB's again?

I am making an update implementation; but for now you will have to reimage the USB. Also I saw your PM, just haven't gotten to it yet.

are the problems you are having with v0015 or v0016?

If they are with v0015; they may be fixed by v0016: so it is probably be worth trying as a potential easy solution.