Ninjastic
PostEdited versionsQuotes to this post
Post
Topic
Board Mining (Altcoins)
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.5 (Windows/Linux)
by
burgla7711
on 23/06/2017, 20:39:16 UTC
Quote from: BigWolf on June 19, 2017, 03:58:11 AM
Quote from: kaka81994 on June 19, 2017, 02:27:43 AM
Quote from: burgla7711 on June 18, 2017, 07:48:06 PM
Hello, i have looked at a lot of the pages in this thread but can not find my issue. I have 5 GTX 1060 msi 3gb cards, trying to use claymore miner. It starts to mine fine then crashes with the following error.

GPU 1, GpuMiner cu_k00 failed 4, unspecified launch failure
GPU 1, GpuMiner kx failed 1
GPU 3, GpuMiner cu_k00 failed 4, unspecified launch failure
GPU 1, GpuMiner cu_k00 failed 4, unspecified launch failure
GPU 2, GpuMiner cu_k00 failed 4, unspecified launch failure
GPU 1 failed
GPU 3, GpuMiner kx failed 1
GPU 1, GpuMiner kx failed 1
GPU 2, GpuMiner kx failed 1
GPU 0, GpuMiner cu_k00 failed 4, unspecified launch failure
GPU 3, GpuMiner cu_k00 failed 4, unspecified launch failure
GPU 3 failed
GPU 1 failed
GPU 2, GpuMiner cu_k00 failed 4, unspecified launch failure
GPU 2 failed
GPU 0, GpuMiner kx failed 1
GPU 3, GpuMiner kx failed 1
GPU 2, GpuMiner kx failed 1
GPU 0, GpuMiner cu_k00 failed 4, unspecified launch failure
GPU 0 failed
GPU 3 failed
GPU 2 failed
GPU 0, GpuMiner kx failed 1
GPU 0 failed

******************************************
here is my batch file.

timeout /t 10
@echo %time% %date%
@echo off

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100

EthDcrMiner64.exe -tt 0 -epool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -ewal 18PPjuF7psTxFRWcP7dBZgbGRHW78fGGWB -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://decred.eu.nicehash.com:3354 -dwal 18PPjuF7psTxFRWcP7dBZgbGRHW78fGGWB

**********************************************

also, device manager shows 5 gpus, but claymore only finds 4. Any tips on this as well.


any help would be appreciated.
I have the same issue with him! My rig have 6 VGA Giga 3gb, but 1st VGA stoped Sad Have anyone help us Sad(

If you are having a single card first (others may fail afterward but usually starts with the same card), check your riser.  specifically I would replace the cheap USB cable that comes with it along with the power adapter if you are using it.  That's where most of my failures have been from.  The other thing to check is to put a meter at the wall and see what your total draw is and make sure you are not maxing out your power supply.


i have a 850 power supply and each card is using 105-110 watt, so i should have plenty of power. Also, the issue happens with 4 cards installed not even 5. Currently , i have three of the cards on the board and only one using the riser and still get the same message. three cards on the board alone run no problem. I am trying to get 4 stable before i work on the 5th. I do not know why the error keeps coming up. I will try to replace the usb cord and the molex to sata. I also have another riser board on the way from a different and better company(according to the reviews). Any other suggestions are appreciated.