Hello! I ran into a problem with my Msi Z270-A motherboard, so I am using 6 Asus dual 1070 OC graphics cards, and only 5 of them are being picked up. The second pci-e riser doesn't seem to be working. I tested the port, it does work and I have tested the riser cables, they all seem to be working. I am a little bit of a loss for words on what I should do to fix this problem.
What type of risers are you using, and how are they being powered?
Version 006 risers, with 2 risers plugged per port on my PSU using 6 pin to sata to molex, thanks for the help!
That sounds good for a riser setup.
First so we have a reference:
press f12 to open the guake terminal and enter the cmd:
lspci | grep VGA
and record what it outputs + before swap for reference
Then:
shutdown and fully power down (PSU as well + click the ATX powerswitch a few times to clear any remaining power in the system)
then swap the 2nd riser (riser + cable) with the 6th gpu riser + cable
power on and enter
lspci | grep VGA
and record what it outputs
then let me know what has been output each time.