Hey fullzero, first i wanted to thank you for all your work, nvOC is pretty great, but i do have some questions,

i recently built a 7 x gigabyte gtx 1070 FE mining rig, running on an asus prime z270-a and i've encountered some problems,

First problem is with Teamviewer, on nvOC v15 i installed teamviewer and added it to startup applications and it worked just fine, but with nvOC v16 i'm having problems, enabling it in oneBash doesn't allow me to connect by itself, after the script enables the service.daemon i have to manually click the Teamviewer icon on the sidebar to be able to connect to the rig, and i want teamviewer to go live as soon as the rig is up.

adding teamviewer to startup application doesn't work on nvOC v16 since startup applications loads teamviewer and oneBash at the same time roughly, the script hasnt had the chance to initiate the teamviewer service.daemon and all you get is an error message telling you that the service.daemon isnt running when it attempts to open teamviewer..



Second problem, and this might actually be a problem with claymore, but commands like "-tt" and "-ttdcr" and most importantly "-tstop" dont work, i have no temp control other then setting the fans and hoping for the best, is there a way for me to at least shut everything down in case things overheat?



Last problem is that when i dual mine sometimes the whole system freezes, or at least slows down to a crawl, with nvOC v15 when this happened the hashrate would drop to 0 for GPU 0, GPUs 1-5 would be at 50% hashrate and GPU 6 would be at 25% hashrate, i'm not sure if this is due to me undervolting/overclocking too much but this only happens in dual mining, i got no error messages in the logs... i also cant find the logs in v16?

i run the GPUs at a pl of 120 and clocks of 200/1800, this works fine when i only mine ETH but i'm having problems in dual mining ETH/SIA



Thanks again..