Hello miners...
First things first, I would like to thank 'fullzero' (infact hero
) for this fantastic job, can't thank him enough.
I've built my first RIG very recently, I would like to find the best OC settings and pool settings to get the best out of it, with the help of miners expertise.
I was getting really good speed on windows but for some reason it doesn't allow me run more than 3 GPU's (it was a trial version), but it was doing 20 MH per card from stock with claymore dual mining.
I had to switch back to Ubuntu but the trouble is I'm only getting 18 MH on an average per card, I'm using claymore dual (ETC + PASC) with CUDA 8.x nvidia driver - 375.66, pulling 1044 watts from wall.
Temperatures : 65 - 73 C
Fans on Auto : 39 - 43
My config -
ASUS DUAL GTX 1060 - 8 GPU's
ASUS Z270P
8 GB RAM
2 x EVGA G2 750 Watts PSU units
8 x V6 Risers
120 GB SSD
Fellow miners using same cards, please share your Core, memory OC + fan + power settings. I would also like to know how to add multiple pools to the nvOC oneBash file.
Would also welcome suggestions about best combination cryptos for better ROI with my equipment.
Thanks in advance.
Regards,
damNmad
First things first, I would like to thank 'fullzero' (infact hero
) for this fantastic job, can't thank him enough.I've built my first RIG very recently, I would like to find the best OC settings and pool settings to get the best out of it, with the help of miners expertise.
I was getting really good speed on windows but for some reason it doesn't allow me run more than 3 GPU's (it was a trial version), but it was doing 20 MH per card from stock with claymore dual mining.
I had to switch back to Ubuntu but the trouble is I'm only getting 18 MH on an average per card, I'm using claymore dual (ETC + PASC) with CUDA 8.x nvidia driver - 375.66, pulling 1044 watts from wall.
Temperatures : 65 - 73 C
Fans on Auto : 39 - 43
My config -
ASUS DUAL GTX 1060 - 8 GPU's
ASUS Z270P
8 GB RAM
2 x EVGA G2 750 Watts PSU units
8 x V6 Risers
120 GB SSD
Fellow miners using same cards, please share your Core, memory OC + fan + power settings. I would also like to know how to add multiple pools to the nvOC oneBash file.
Would also welcome suggestions about best combination cryptos for better ROI with my equipment.
Thanks in advance.
Regards,
damNmad
Glad you like nvOC
Are these 3gb or 6gb 1060s?
If they are 3gb I would try these settings:
https://bitcointalk.org/index.php?topic=1854250.msg19703709#msg19703709
Thanks for your reply
I'm using 6GB 1060s.
What settings would you suggest?
I'm currently on
Core Clock - 100
Mem Clock - 800
Power Limit - 110 Watt
I'm getting
160 MH (20.xx per card) on average (6 hours) 1620 MH for PASC on average (6 hours) for 8 cards (definitely increased from my previous hash rate, thanks for that)
Any suggestions/improvements would be really appreciated.
I would bump up the mem Clock by 50 every 5 mins or so until you get a soft or hard crash then back off.
Sure I will try that.
BTW I have another question, currently in my bash file I have only added 1 pool, is there any way to add more pools (for eg ethermine has 2 eu pools, would like to add backup pool to send more shares)?