Re: [OS] nvOC easy-to-use Linux Nvidia Mining

So I've imaged my USB, set up onebash & plugged the USB into my rig. The monitor immediately showed " grub rescue".

Questions:
1. I assume this the process of converting the file from windows to linux- correct?

2. If so, this process has been running for 30 minutes. How long should it take?

This shouldn't happen.
Try flashing the USB again

Flashed 3 times. Even left fullzero's oneBash mining info intact on the 3rd attempt. Same result.

Maybe it won't work with this MoBo?:

http://www.asrock.com/mb/Intel/Z170A-X13.1/

what image are you using?

Did you forget to extract the image from the zip before imaging?

v0016. Yes I extracted it. I'll try v0017.

what usb do you have? i would get a 32gb one if you can

64 GB SANDISK ULTRA. Downloading v0017 now.

is this it?

https://www.amazon.com/SanDisk-Ultra-Transfer-Speeds-SDCZ48-064G-UAM46/dp/B00KYK2ABI/ref=sr_1_1?

this works for sure:

https://www.amazon.com/Lexar-JumpDrive-32GB-Flash-Drive/dp/B00T61JM4E/ref=sr_1_1?

https://www.amazon.com/gp/product/B012PKT4QS/ref=oh_aui_detailpage_o04_s00?

I have had no trouble with the 2 above.

I have had trouble with some sandisk loading smOS linux

Yes-that's the one I am using Philip.
Guys, thanks for your help & patience. Everything worked fine this time. The only I did different was use a newer PC.

Anyhow, I'm mining at 39 MHS on 2x 1060s and the whole rig is using only 171 watts. Before the mining began, it was 65 watts. So it looks like I am using less than 60 watts per GPU.