Any way to remotely update from 0016 to 0017?
Not yet, working on updating.
@Fullzero....
I now have OC control of the 1060 and 1070. My MoBo has 4 PCIe slots. 2 of them have the blue tabs on the back to hold cards down. THATS the 2 I ended up trying and now I can OC both cards. Of course when I add the other 2 cards I doubt I will be able to OC them. One of the cards is coming Saturday so I will try it then and let you know. BTW all my other cards are on eternal back order it seems lol.
Can you send me in either post or PM the original xorg.conf please. The changes I made have shrunk my TeamViewer so small I can barely see it.
Thanks again for your help
I now have OC control of the 1060 and 1070. My MoBo has 4 PCIe slots. 2 of them have the blue tabs on the back to hold cards down. THATS the 2 I ended up trying and now I can OC both cards. Of course when I add the other 2 cards I doubt I will be able to OC them. One of the cards is coming Saturday so I will try it then and let you know. BTW all my other cards are on eternal back order it seems lol.
Can you send me in either post or PM the original xorg.conf please. The changes I made have shrunk my TeamViewer so small I can barely see it.
Thanks again for your help
press f12 and enter:
Code:
sudo cp '/etc/X11/xorg.conf.backup' '/etc/X11/xorg.conf'
this should restore the original xorg.conf
Darn, that didn't work. No problem I will just re-image the drive. Only takes about 15 mins
I'm gonna give you 24 hours of mining to your ETH address also. Thanks for making my life easier....
Thanks for hashes
Hey everyone - whats a good Clock setting for a MSI Z270-A Pro mobo and EVGA 1080ti cards?
- I have tried power limit of 235 with 0 clock and 0 mem = ran for 12 hours then crashed and had to reboot as the sols came down to 0 and power came down to 8w
- now i changed the power limit to NO and clock to -15.
Any suggestions?
- I have tried power limit of 235 with 0 clock and 0 mem = ran for 12 hours then crashed and had to reboot as the sols came down to 0 and power came down to 8w
- now i changed the power limit to NO and clock to -15.
Any suggestions?
For ZEC and 1080tis I would try:
Code:
POWERLIMIT="YES"
POWERLIMIT_WATTS=225
__CORE_OVERCLOCK=100
MEMORY_OVERCLOCK=900
MANUAL_FAN="YES"
FAN_SPEED=75 #or higher
POWERLIMIT_WATTS=225
__CORE_OVERCLOCK=100
MEMORY_OVERCLOCK=900
MANUAL_FAN="YES"
FAN_SPEED=75 #or higher