Post
Topic
Board Beginners & Help
Topic OP
2x ASUS 7950 low voltage problem
by
hsk81
on 01/05/2013, 02:23:09 UTC
Hi everybody,

I'm relatively new to mining and have the following setup:

Graphic cards: 2x ASUS HD7950 DirectCU II TOP GDDR5 3GB 384Bit AMD Radeon DX11.1;
MB: ASUS M5A99FX PRO R2.0 AMD 990FX/SB950 DDR3 2133MHZ(O.C.);
CPU: AMD FX X4 4100 SOKET AM3+ 3.6GHZ 12MB CACHE 32NM;
RAM: CORSAIR 8GB VENGEANCE DDR3 1600MHZ CL10 (single module);
PSU: GX 80PLUS 750W (bronze, 85% efficiency);

I don't use any risers; if a test each device separately I get a performace of about 580kH/s @ 1.090V (did not tweak extremely long, might get higher numbers); this is fine. But when I try both cards together then one of then cards voltage drops to 0.800V with corresponding engine clock down to 300Mhz; the other cards is fine but my overall performance is lower than 580kH/s.

I tried increasing the SB (Southbridge) voltage in the BIOS but that did not help at. Tried to combine a Sapphire 7950 with an Asus 7950 and got the same problem: One of the cards has systematically significant lower voltage (and therefore lower engine clock). I'm quite stuck .. I suspect the motherboard, but I feel with all its tweakable parameters a litte overwhelmed ..  Sad